Skip to content

Typical 2026 prices for windows and doors

Window Replacement Cost in Kitchener-Waterloo (2026)

GTS Windows & Doors is a Kitchener window and door installer that has served homeowners, landlords, property managers and builders across Waterloo Region since 1986. We measure, quote and install replacement windows, entry doors and patio doors in Kitchener, Waterloo, Cambridge, Guelph and the surrounding townships, and every job carries our 20-year parts and labour warranty. As a licensed, insured and WSIB-covered SAWDAC member, we price work the way we install it: opening by opening.

Most cost guides that turn up in local searches are written for Toronto, where labour, parking and access costs run higher and the housing stock is different. The ranges on this page reflect what Waterloo Region jobs typically cost in 2026, covering the product, removal of the old unit, installation, insulation, trim and disposal. They are built around the homes we see most here, from postwar brick bungalows and 1990s two-storeys to century homes near the downtown cores.

Every house is different, so treat these figures as typical ranges rather than a quote for your home. This guide was last updated in September 2026, and we revise it when product and labour costs move. An on-site measure is the only way to get an exact, itemized price for your openings.

Window Replacement Cost by Window Type

Prices below assume white vinyl frames, double pane Low-E glass with argon, and a standard retrofit installation with new interior trim and exterior caulking or capping. Bay and bow prices include the seat board, head board and insulation, but a new roof over the bay is extra.

Casements and awnings cost more than sliders of the same size because they add cranks, hinges and multi-point locks. If you are weighing a full set of new units, our window replacement page walks through the process from measure to final walkthrough.

  • Small: basement sliders, bathroom awnings and narrow casements.
  • Medium: most bedroom and kitchen windows.
  • Large: living room picture windows, wide sliders and casement combinations.
Window typeSmall (under 10 sq ft)Medium (10 to 20 sq ft)Large (over 20 sq ft)
Single or double slider$550 to $850$750 to $1,150$1,000 to $1,600
Single or double hung$650 to $950$850 to $1,250$1,100 to $1,700
Casement$700 to $1,000$900 to $1,400$1,300 to $2,100
Awning$650 to $950$850 to $1,300$1,100 to $1,700
Picture (fixed)$500 to $800$750 to $1,200$1,100 to $2,000
Bay window (3 sections)Not typical$3,500 to $6,000$5,000 to $8,500
Bow window (4 or 5 sections)Not typical$4,500 to $7,500$6,500 to $10,000

Window Cost by Frame Material

Frame material changes the price more than any other single choice. This table compares a medium casement installed with the same double pane glass package.

  • Vinyl gives the best value for standard sizes and light colours.
  • Fibreglass earns its premium on dark colours, big openings and heavy glass.
  • Wood and clad wood suit heritage homes and custom builds.
  • Aluminum fits modern designs and light commercial buildings.
Frame materialTypical installed price, medium casementCompared with vinyl
Vinyl$900 to $1,400Baseline
Fibreglass$1,300 to $2,300About 30 to 60% more
Solid wood, primed$1,300 to $2,500About 40 to 80% more
Thermally broken aluminum$1,400 to $2,800About 50 to 100% more
Aluminum-clad wood$1,500 to $3,000About 60 to 110% more

Double Pane vs Triple Pane Price Difference

Upgrading from double to triple pane typically adds $100 to $250 per average window in 2026, roughly 10 to 20 percent. On large picture windows and patio doors the premium is higher because the extra glass is heavier and needs stronger sashes and hardware.

Triple pane pays off most in bedrooms, north-facing rooms, homes on busy roads and houses you plan to keep for many years. Our page on triple pane windows covers the comfort, condensation and noise trade-offs.

Glass packageTypical added cost per medium window
Double pane, Low-E, argonIncluded in the prices above
Double pane with laminated or extra Low-E coating$75 to $250
Triple pane, two Low-E coatings, argon$100 to $250
Triple pane on a large picture window or patio door$250 to $600

Door Replacement Costs

Door prices include the pre-hung door and frame, removal of the old unit, installation, insulation, interior casing and exterior sealing or capping. Hardware, glass inserts and paint colours move the final number.

Front Door Replacement Cost

A standard steel front door typically costs $2,000 to $4,000 installed, and fibreglass runs $2,800 to $5,500. Sidelights, decorative glass, multi-point locks and smart hardware push the price toward the top of the range. Our entry door replacement page compares the options in detail.

Patio Door Replacement Cost

Replacing a sliding patio door typically costs $2,500 to $4,500 for a standard 5 or 6 foot vinyl unit. Wider, three-panel, triple pane or fibreglass doors run $4,000 to $7,500, and hinged garden doors cost more again. See sliding patio doors for styles and glass options.

DoorTypical installed price (2026)
Steel entry door, single, pre-hung$2,000 to $4,000
Fibreglass entry door, single, pre-hung$2,800 to $5,500
Entry door with one or two sidelights$4,500 to $9,000
Double entry doors or custom wood$6,000 to $12,000+
Vinyl sliding patio door, 5 or 6 ft$2,500 to $4,500
Sliding patio door, 8 ft, 3-panel or triple pane$4,000 to $7,500
Hinged garden or French patio door$4,500 to $9,000

What Pushes the Price Up or Down

Two quotes for the same number of windows can differ by thousands of dollars. These factors explain most of the gap.

Same-size replacements usually need no building permit in Kitchener, but enlarged openings and designated heritage properties can. Our permit and heritage guide for Kitchener explains which jobs need approval and how that affects timing.

  • Brick openings and full-frame removal: taking old frames back to the brick or studs adds about $150 to $400 per window over a retrofit install. Our window installation page explains when each method is right.
  • Enlarged or new openings: cutting brick or framing for a bigger window typically adds $1,500 to $4,000+ per opening, plus engineering and a building permit where required.
  • Custom shapes: arches, circles, trapezoids and half-rounds run about $1,200 to $3,500+ each.
  • Colour: dark or custom exterior colours add about 10 to 20 percent on vinyl and less on fibreglass or aluminum.
  • Heritage requirements: matching original profiles, divided lites and wood can double the cost of a standard window, and a heritage permit adds lead time.
  • Second-storey and difficult access: ladders work for most two-storey homes, but scaffolding or a lift adds roughly $500 to $1,500 per setup.
  • Capping and trim: exterior aluminum capping adds about $100 to $250 per window, and new interior casing with extension jambs about $75 to $250.
  • Disposal: removal and disposal of old units is normally part of the quote, so ask if it is missing.
  • Volume: larger orders cost less per window because measuring, delivery and setup are shared.
Front of a single-storey home with several new white-framed windows

Typical Whole-House Window Budgets

These are illustrative scopes based on common Waterloo Region house types, not specific past projects. They show how the per-window prices above add up for a full job.

Home and scopeWhat is includedTypical total (2026)
1960s brick bungalow, 10 windowsWhite vinyl casements and sliders, double pane Low-E argon, retrofit install, aluminum capping$9,000 to $14,000
1990s two-storey, 16 windows and a patio doorVinyl casements with triple pane glass, 6 ft sliding patio door, retrofit install$18,000 to $28,000
Townhouse, 7 windows and a front doorVinyl sliders and casements, steel entry door with sidelight$11,000 to $17,000
Century home, 12 windowsWood or clad wood with heritage profiles, full-frame install, new interior trim$28,000 to $50,000+
Newer home, 20 windows with black exteriorsFibreglass casements and picture windows, triple pane$35,000 to $55,000

How to Compare Window Quotes

The lowest total is not always the cheapest job once exclusions are added back in. Line up quotes using these five checks, and see our guide to choosing a window company for the questions to ask the installer.

Itemized vs Lump Sum

An itemized quote lists every opening with size, style, glass and price, so you can compare line by line. A single lump-sum number hides where the money goes and makes scope changes hard to price.

Installation Method

Check whether each opening is quoted as retrofit or full-frame, and how the gap will be insulated and flashed. Install method alone can move the price of one window by hundreds of dollars.

Disposal, Trim and Capping

Confirm that removal, disposal, interior trim, exterior capping and caulking are included. These are the items most often left off low quotes and added later.

Product and Model Numbers

Ask for the manufacturer, product line and ENERGY STAR model for each window. You need them for rebates and to be sure you are comparing similar products.

Warranty Terms

Separate the manufacturer's product warranty from the installer's labour warranty and check the length of each. GTS covers parts and labour for 20 years.

Rebates and Financing

Ontario's Home Renovation Savings program pays $100 per ENERGY STAR window or door rough opening when you complete a home energy assessment and at least two eligible upgrades. Eligibility depends on how your home is heated and who supplies your gas, so read our window rebate guide before you plan around it.

Homeowners in Cambridge and North Dumfries who are GrandBridge Energy customers can apply for low-interest RetrofitWR loans that cover energy-efficient windows and doors. If financing matters to your decision, raise it when you request a quote so we can factor it into the plan.

Installer holding a white window in a rough opening with shims and level on

Window and Door Cost FAQs

How much does it cost to replace a window in Ontario?

In Waterloo Region in 2026, most standard vinyl replacement windows cost about $650 to $1,400 each installed, with large and specialty units costing more. Fibreglass, wood and aluminum typically cost 30 to 100 percent more than vinyl. Toronto prices tend to run higher because of labour and access costs.

How much should I pay for new windows and doors?

A typical three-bedroom home with 12 to 16 windows and one door usually lands between $14,000 and $28,000 in vinyl, depending on glass, install method and the door you choose. Fibreglass or wood packages can reach $35,000 to $55,000 or more. An itemized quote is the only way to know your exact number.

Is it cheaper to replace all windows at once?

Usually, yes. Measuring, ordering, delivery, crew setup and disposal are shared across the whole order, so the price per window drops, and the glass and colour stay consistent. If the budget is tight, doing the worst elevation first and the rest within a year or two is a reasonable compromise.

What is the cheapest time of year to replace windows?

Demand peaks in the fall, so late winter and early spring can mean shorter lead times and more flexible scheduling. Product prices rarely drop by season, so the bigger savings come from ordering several openings together and choosing standard sizes and colours. Windows can be installed year-round, one opening at a time, even in January.

How much does window installation cost per window?

Installation labour alone typically runs $200 to $450 per window for a retrofit install and $350 to $700 or more for full-frame replacement in 2026. Brick openings, second-storey access and custom trim add to that. Most installers price supply and installation together, and many will not warranty windows bought elsewhere.

Get an Itemized Quote

Book an on-site measure and we will price every opening separately, with product, glass, install method and trim spelled out. You will know exactly what you are paying for before you decide.

Call or text226-806-0597
Monday to Saturday: 7:00am to 9:00pm
Sunday: 9:00am to 5:00pm
47 Bridge Street East, Kitchener, ON N2K 1J7
Call 226-806-0597Quote